Imodyuli yokubonisa i-LED yangaphakathi ye-P2.5mm 160*160mm

IImodyuli yokubonisa i-LED yangaphakathi ye-P2.5mm eyi-160×160mmInika iingenelo ezithile, ngakumbi xa kuthelekiswa neemodyuli eziziingxande ezingama-320×160mm eziqhelekileyo:

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

1. Ukuguquguquka koyilo oluphezulu

• Ijiyometri yesikwere egqibeleleyo:Umlinganiselo we-aspect ratio ye-1:1 wenza kube lula kakhulu ukuyila nokudibanisa izikrini zesikwere ngokugqibeleleyo ngaphandle kokulinganisa okuntsonkothileyo kwezibalo.

• Iimo Ezinobuchule NezingaQhelekileyo:Yeyona nto ifanelekileyo yokwakha ii-LED ezinobuchule, ezinje ngee-LED cubes, ii-column wraps, iikona ezimile okwe-L, kunye ne-staggered creative layouts.

2. Isisombululo Esiphezulu kunye noxinano lweePixel

• Imifanekiso ecacileyo:Ngokuphakama kwe-pixel eyi-2.5mm, inika ii-pixel eziyi-160,000 ngemitha yesikwere, iqinisekisa imifanekiso ecacileyo kunye nombhalo ofundekayo ukusuka kumgama obukelekayo (iimitha eziyi-2.5 okanye ngaphezulu).

• Isisombululo seGridi:Ibhloko nganye ye-160×160mm ine-matrix exineneyo ye-64 × 64 pixel, ebonelela ngoxinano oluphezulu lwesakhiwo ukuze kufumaneke umxholo ocacileyo.

3. Ubunjineli obuchanekileyo

• Ukudibanisa Okungenamthungo:Unyawo oluncinci lwemodyuli luvumela ukunyamezelana okuqinileyo koomatshini, nto leyo ebangela ukuba umphezulu wesikrini ube tyaba ngokupheleleyo, ongenamthungo ongenazikhewu zibonakalayo phakathi kweephaneli.

• Ukulungiswa okulula:Ukuba i-pixel ayiphumeleli, ukutshintsha imodyuli encinci ye-160mm kubiza kakhulu kwaye kukhawuleza kunokutshintsha iphaneli esemgangathweni enkulu.

Ezona mpawu

• Isisombululo: amachaphaza angama-4,096 ane-grid matrix engama-64×64. Amachaphaza angama-8,192 ane-grid matrix engama-128×64.

• Iphimbo le-pixel eliyi-2.5mm ukuze kubekho ukusebenza okubonakalayo okungcono kunye nokucaca okuhle

• Ubukhulu: 320mm x 160mm / 12.6” x 6.3” okanye 160mm x 160mm / 6.3” x 6.3”

• Eyona ilungileyo yokujonga ngaphakathi, i-160-degree

• Ukufakwa kwamandla okulawulwa yi-5V

• Iphaneli yesikrini se-LED enemibala epheleleyo ye-1R1G1B

• Ukuskena kwangoku okungaguqukiyo kwe-1/32

• Ukukhanya kwe-600-1,000 nits.

• Ii-IC zomqhubi ezizinzileyo kakhulu ukuze umbala ufane ngcono kwaye imifanekiso ibonakale inomtsalane

• Yenzelwe nge-SMD 1R1G1B encapsulation yamva nje, enika umbala opheleleyo ogqwesileyo.

• Umlinganiselo ophezulu wokungafani kwemibala we-5000:1 ukuze kubonakale imibala eqaqambileyo.

• Izinga eliphezulu lokuhlaziya elingaphezulu kwe-1920hz ukuya kwi-3840Hz ukuvumela ukuba kungabikho ukufiphaza

Ubungakanani obuBini obufumanekayo

Ubungakanani obuhlukeneyo obubini obuyi-160 * 160mm kunye ne-320 * 160mm.

Uthotho lwe-320×160mm

> Ubungakanani: 320×160mm
> Isisombululo: 128×64 amachaphaza
> Imo yomqhubi: Isantya sokuskena se-1/20

Olu luhlu lwe-320mm x 160 mm lufakelwe imigca eli-128 kunye neekholamu ezingama-64 ze-LED, oko kuthetha ukuba kukho ii-LED ezifikelela kwi-8,192 kwiphaneli nganye. Lunobuninzi be-pixel obufanayo ne-160mm * 160mm series P2.5 module kodwa luphindwe kabini kunee-LED kwaye lubiza kakhulu. Olu bungakanani obuqhelekileyo luvumela i-P2.5 module ukuba ihambelane nezimo ezininzi ze-320 × 160mm series LED modules. Ukuba ufuna ubungakanani obufanayo kunye ne-pitch ebanzi yomgama omde wokubukela, jonga kwiP4 or P5.

Uthotho lwe-160×160mm

> Ubungakanani: 160×160mm
> Isisombululo: 64×64 amachaphaza
> Imo yomqhubi: Isantya sokuskena se-1/32

Uthotho lwe-160mm×160mm luyilwe ngomlinganiselo we-1:1, olunikezela ngee-LED ezikhanyayo ezinemibala epheleleyo ezifikelela kwi-4,096 ezisasazwe kwiphaneli enemigca engama-64 kunye neekholamu ezingama-64, nto leyo ezisa umlinganiselo ophezulu kakhulu wokungafani kunye nokuhambelana kombala okuphezulu kakhulu. Oku kufana kakhulu nephaneli yethu ye-LED yangaphakathi ye-3mm pitch 192 x 192 mm, nayo eyilwe ngomlinganiselo we-1:1 kwaye inikezela ngee-LED ezingama-64 x 64 kodwa ngomgama obanzi phakathi kwee-LED kwi-3mm.

Inkcazo

Inombolo yoMzekelo	P2.5-160x160-32S
Ubungakanani bemodyuli	160mm*160mm
Ubukhulu bemodyuli	15mm, 27mm
Iphimbo lePixel	2,5mm
Ubuninzi beePikseli	160000dot/m2
Uqwalaselo lwePixel	1R1G1B
Imo yephakheji	I-SMD 3IN1 -1515
Isisombululo sePixel	Amachaphaza angama-64(W)*amachaphaza angama-64(H)
Amandla aphezulu	25W
Ubunzima	0.232kg
Uhlobo lweDrive	Ukuqhuba rhoqo
Imo yokuskena	1/32 iskeni
Uhlobo lwezibuko	I-HUB75E
Ukukhanya kwebhalansi emhlophe	800cd/m2
Umgama ongcono wokubukela	3M～20M
Eyona engile yokubukela	160°(W) 120°(H)
Ubushushu	(Ugcino) 35℃～+85℃, (Iyasebenza) -20℃～+50℃
Ubuntu bezizalwane	10% -95%
I-voltage yokusebenza	I-DC 5V
Ukusetyenziswa kwamandla okuphakathi	<320W/㎡
Ukusetyenziswa kwamandla okuphezulu	<780W/㎡
Okwangoku	<18mA (i-LED enye)
Isixhobo sokuqhuba	I-IC yokuqhuba rhoqo
I-frequency yokuhlaziya	>1920HZ
Isikali/imibala engwevu	Imibala eyi-65536grey level/16.7M
I-MTBF	>iiyure ezingama-9000
Utshintsho lwamandla	Ukutshintsha okuzenzakalelayo

Uvavanyo lokuvelisa kunye nokwaluphala kweModyuli yoBoniso lwe-LED

Ukuqinisekisa ukusebenza kwexesha elide, iimodyuli zethu ze-LED zivavanyelwa ukuguga kakhulu okulinganisa iminyaka yokusebenza kwehlabathi lokwenyani. Sibeka ezi modyuli kwiimeko ezigqithisileyo - ubushushu obuphezulu, ukufuma okuphezulu, kunye nokusebenza okuqhubekayo koxinzelelo oluphezulu - ukuze sivavanye ngokungqongqo uzinzo lwazo, ukuthembeka kwazo, kunye nobomi bazo.

Iiparameter zoVavanyo oluBalulekileyo:

Uzinzo lokukhanya - Iqinisekisa ukukhanya okukhanya rhoqo ngaphandle kokuwohloka okubonakalayo

Ukugcinwa kombala - Kuqinisekisa ukuba imibala ihlala ikhanya kwaye iyinyani ngaphandle kokutshintsha

Ukubola kokukhanya - Kulinganiswe kwaye kwaqinisekiswa ngokwemilinganiselo yokusebenza engqongqo

Uzinzo loNikezo lwaMandla - Iqinisekisa ukusebenza okuthembekileyo kumanqanaba athile e-voltage/current

Olu vavanyo lubanzi lusenza sikwazi ukuchonga nokusombulula iingxaki ezinokubakho kwangethuba, siqinisekisa ukuba imodyuli nganye inika umgangatho ogqwesileyo kwaye ihlangabezana nolindelo lwabathengi.

Apha eXiaosan, sidibanisa izixhobo zokuvelisa eziphambili kunye neengcali ezinamava ezijonga ngononophelo yonke inqanaba lemveliso - ukusuka ekukhethweni kwezixhobo ukuya ekuhlanganisweni kokugqibela - ukuqinisekisa umgangatho ophezulu wemveliso kuyo yonke inyathelo.

Izicelo ze-Indoor LED Screen Display

Igalari yeNtengiso

Isikrini se-LED sangaphakathi se-P2.5 singasetyenziswa kwigalari yokuthengisa ukubonisa ulwazi lwemveliso yakho, ividiyo yokwazisa kwananjengemvelaphi yeziganeko zakho.

Igumbi lokudanisa lehotele

Sebenzisa iP2.5 Indoor LED Screen Display njenge-background ye-ballroom yehotele okanye uxhonywe eludongeni ukubonisa iividiyo kunye nemifanekiso enamandla.

Iziko leMiboniso

Isikrini se-LED sangaphakathi se-P2.5 singafakwa kwiholo/iziko lomboniso ukuze kufumaneke ulwazi okanye izilayidi zokubonisa abathathi-nxaxheba.

Indlu yokudibana

Sebenzisa iP2.5 Indoor LED Screen Display endaweni yeprojektha ukuze ubone kakuhle kwaye ukhanye, ngaphandle kokucima izibane zegumbi kunye nokuqengqeleka kweekhethini.

Intengiso

Isikrini se-LED sangaphakathi se-P2.5 sisetyenziswa ngokweemodyuli, oko kuthetha ukuba unokuguquguquka okupheleleyo xa uyila esinye ngenjongo yentengiso, ukuze ube nobuchule obupheleleyo.

Indlu yoKwakha

Yenza i-lobby yakho yesakhiwo ibe yeyanamhlanje nge-Indoor series LED Screen Display yethu. Ingafakelwa eludongeni, kwikholamu nakwisilingi efanayo.

Usasazo lweTV

NgeP2.5 Indoor LED Screen Display, usasazo okanye imvelaphi yesitishi seTV inokutshintshwa ngexesha langempela ukuze ifumane ulwazi okanye iinjongo zokuhombisa.

Ivenkile

Nciphisa imisebenzi yokuprinta nge-Indoor series LED Screen Display yethu, apho iintengiso zakho zinokuhlaziywa ngokucofa nje imawusi.

Ungakhetha njani phakathi kwe-160 * 160mm kunye ne-320 * 160mm?

Ukukhetha phakathi kwemodyuli ye-160×160mm (isikwere) okanye i-320×160mm (unxande) (P2.5mm) ngokuyintloko kuxhomekeke kwimo yesikrini sakho, uhlahlo lwabiwo-mali, kunye nendawo yokufakela. Ungakhetha ngokusekelwe kwiimilinganiselo ezintathu eziphambili ezilandelayo:

1. Chonga imo yesikrini sakho kunye neemfuno zakho zokuyila.

Khetha i-160×160mm: Ukuba wenza isikrini setyhubhu ye-LED, isikrini esisilinda, isikrini sekona esekunene, isikrini esisikwere, okanye ukuba indawo yokufaka ixinene kakhulu kwaye ubude nobubanzi kufuneka buchaneke ukuya kuthi ga kwii-multiples ze-16 cm.

Khetha i-320×160mm: Ukuba wenza isikrini esikhulu esiqhelekileyo se-16:9 okanye i-4:3 (njengegumbi leenkomfa okanye imvelaphi yeqonga). Le modyuli ingxande isemgangathweni weshishini kwaye kulula kakhulu ukuyidibanisa ibe ngumlinganiselo oqhelekileyo wokubonisa.

2. Cinga ngebhajethi yakho kunye neendleko zokufakela.

Ukhetho lokuqala olungabizi kakhulu: 320×160mm. Ngenxa yendawo enkulu yemodyuli nganye, inani leemodyuli ezifunekayo ukudibanisa indawo efanayo lincitshiswa ngesiqingatha. Oku kuthetha ukuba kufuneka kuthengwe iintambo zeribhoni kunye neentambo zombane ezimbalwa, kwaye iindleko zomsebenzi wokufakela zincitshisiwe kakhulu.

Ixabiso eliphezulu: 160×160mm. Inani leemodyuli liphindaphindeka kabini kwindawo enye, nto leyo ebangela umthwalo omkhulu wocingo, ukubalwa komthwalo wekhadi lolawulo oluntsonkothileyo, kunye neendleko eziphezulu zehardware kunye nomsebenzi.

3. Ukuqwalasela ukulula kokugcinwa kamva

Ukulungiswa kweendawo: 160×160mm. Ukuba kuvela i-pixel enesiphene kwindawo ethile, iindleko kunye nefuthe lokutshintsha imodyuli enye zincinci ngenxa yendawo encinci yemodyuli.

Ukulungiswa okukhawulezileyo: 320×160mm. Iindawo ezinkulu kulula ukuzilawula ukuze zihlale zithe tyaba, kwaye indawo enokutshintshwa ngaxeshanye ngexesha lokulungiswa inkulu, nto leyo eyenza ukuba ifaneleke kwizikrini ezinkulu zorhwebo ezifuna ukulungiswa ngokufanelekileyo.

Nceda undixelele ubude nobubanzi obuthile besikrini esikhulu oceba ukusifaka, okanye imeko yokufakela (njenge-pillar cladding, indawo yokwamkela iindwendwe, igumbi leenkomfa), kwaye ndiza kukucebisa iinkcukacha ezifanelekileyo kuwe.